 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FEATURES AND SPECIFICATIONS MTP-CPI (Coplanar Interconnect) 106088 First-to-market optical coplanar interconnect allows quick and reliable front blade service or upgrade without disrupting backplane cabling systems Molex's new coplanar connector allows front cards to be replaced without disrupting cabling at the rear of the chassis, resulting in maintenance flexibility and minimal service interruption. The MTP*-CPI (coplanar interconnect) provides a smooth transition from the front blade active devices (LEDs, lasers and receivers) to the rear transition module (RTM). Molex developed the MTP-CPI to meet the dimensional requirements of the Advanced Telecom Computing Architectures (Advanced TCA or ATCA), zone 3, connector specification. ATCA is an emerging standard focused on developing a new blade (board) and chassis (shelf) form factor optimized for high-speed communication systems. The principal objective is to provide standardized platform architecture for central office or service provider applications. For more information on ATCA, please reference page 4 of this product release, or visit www.picmg.org. Molex selected the MTP connector interface for use in the ATCA midplane application because of its optical density and interoperability between vendors. The MTP connector is the industry standard connector system for multi-fiber and parallel optical transceiver applications. The MTP-CPI is not limited to ATCA applications and may be used in any coplanar application. The new Features and Benefits Hermaphroditic design allows the same interconnect housing to be used on front and rear blades simplifying procurement and inventory No mating frame required in the backplane simplifies design and assembly for the customer SPECIFICATIONS Reference Information Packaging: Individual Packed Mates With: - The MTP-CPI is hermaphroditic - MTP cable assemblies are sold separately (MTP specifications can be found on the Molex website at: www.molex.com/fiber/mtpca.html) Optical Insertion Loss (IL): Dependent on the fiber type and performance requirements (MTP specifications can be found on the Molex website at: www.molex.com/fiber/ mtpca.html) Mechanical Mating Force: 10.0 lbf (44.48N) Durability: 200 mates Physical Housing: Thermoplastic Polyphenylene Sulphide (PPS) Operating Temperature: -40 to +80C RoHS Compliant Inner housing is spring loaded providing generous Z-float which compensates for card tolerances MTP connector optical interface meets industry standard interface specifications for multi-fiber and parallel optical transceiver applications MTP-CPI is easy to design-in; it is mounted directly to the card with a simple pass-through cutout in the backplane. The MTP-CPI is a hermaphroditic design, which simplifies the procurement for the customer. With the use of the MT ferrule in the MTP connector, fiber counts from 8 to 72 fibers can be achieved. Molex's MTP cable assemblies are sold separately. *MTP is a registered trademark of US Conec LTD APPLICATIONS MTP-CPI (Coplanar Interconnect) 106088 Internetworking Equipment - Routers - Hubs - Servers Telecommunication Equipment - Central office - Wireless infrastructure - Multi-platform service systems (DSL, cable data) Test and Measurement Equipment ATCA chassis with MTP-CPI ORDERING INFORMATION Order No. Component Mounting Style Dimension (L x W x H) 106088-0100 106088-0200 106088-0800 Connector Connector Removal Clip Rear-Mount Side-Mount N/A 21.57mm (.849") x 21.31mm (.839") x 17.64mm (.694") 14.35mm (.565") x 32.24mm (1.269") x 17.64 (.694") N/A Rear-Mount Side-Mount Removal Clip MTP-CPI Cable Assemblies MTP cable assemblies sold separately. See Molex website for ordering information: www.molex.com/fiber/mtpca.html. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Order No. USA-334 Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters European Headquarters Jurong, Singapore Munich, Germany 65-6-268-6868 49-89-413092-0 fesinfo@molex.com eurinfo@molex.com Visit our website at www.molex.com/product/mtp-cpi.html Printed in USA/JI/2006.01 Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 (c)2006, Molex |
Price & Availability of 106088-0100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |